Bestop Family of Brands
BPAG Family of Brands
Learn About the Bestop Premium Accessories Group
Dealers
Help
Cart

Jeep

Trucks

Vans

UTV

Commercial

Select Your Vehicle
Can't find your vehicle?
Universal Systems
Shop
Wireless Systems
Shop
Brackets & Mounts
Legends
Shop By Product
Community
+ Add Your Vehicle
+ Add a Vehicle
ADD VEHICLE
Can't find your vehicle?

test

Fitment: 2024 Jeep Wrangler JL

CMM A-Pillar 1 Inch Ball Mount Solution – Jeep 2024-On Wrangler JL; 2024-On Gladiator

Carolina Metal Masters (CMM) Offroad A-Pillar Ball Mount Solution for Jeep JL and JT

  • Year Specific models: 2024-on Jeep JL/JT Models
  • 3D machined insert made out of 6061 Aluminum and Anodized Black. 
  • 1” ball Mount for electronic devices such as sPOD Mini6, HD or touch screen controllers, cell phones, GPS, etc.
  • Can be used in any of the 4 locations, above or below the factory A-Pillar handle
  • It can be added to the front only! 

Comes with:

  • (1) 1” ball mount
  • (1) 3D machined base
  • All Hardware

This product is a quick installation. No drilling or cutting needed. Remove the existing cover panel, replace it with the CMM Offroad insert and inserting one bolt into the factory hole. 

Add-ons (sold separately):

  • RAM Mount Double Socket Arm for 1-inch ball (PN: 860245)
    The Double socket arm has a socket at both ends that accommodates 1″ balls. RAM’s socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.
  • 1/4-20 Female Threaded Hole with 1-inch ball (PN: 200244)
    1/4″-20 female thread connected to a 1″ rubber ball. This can be added to the back of the HD or Touchscreen for additional mounting options.

SourceLT w/ Mini6 for Jeep JL/JT – Jeep JL/JT

The SourceLT w/Mini6 for the Jeep JL/JT will save hours of wiring & installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

  • 6 circuits rated at 30 amps at 12.5 VDC per circuit
  • 12-position terminal block (easily attach accessories)
  • Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller
  • Integrated low voltage cutoff (LVCO) battery protection w/ optional override
  • Self-healing fault protection circuits (from 1.5 to 30amps)
  • Current-sensing MOSFETs controlled by a microprocessor (no fuses & no relays)
  • 100amp in-line fuse
  • Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
  • Operates on 12VDC
  • Built-in Bluetooth capabilities for remote control
  • Protection against: overheating, over-current, shorts, reverse polarity and field collapse
  • On-demand wireless software updates/upgrades 

HARDWARE:

  • Powder coated steel base w/ built in hardware
  • Silicone gasket for weatherproofing
  • Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends
  • Universal & vehicle specific mounting options
  • Robust insulated base and cover

MINI6 CONTROL PANEL:

  • Panel Dimensions: 2.062″ W x 3.260″ L x .375″ D
  • Programmable modes: momentary / latch and backlight brightness level
  • Visual feedback circuit ON indicator light for each button
  • Includes one sheet of 72 standard legends
  • Power-saving Deep Sleep Mode: Deactivates after 6 hours of inactivity
  • Silicone buttons for easy touch activation
  • Can run in conjunction with a 6-switch panel
  • CAT-6 Ethernet connected (up to 25 feet from SourceLT)

 

FEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):

Each switch can be programmed for:

  • Dimming
  • Strobe
  • Flash
  • Momentary
  • Switch Linking
  • On-Road and Off-Road mode of operation

BLUETOOTH REQUIREMENTS:

  • Access to iTunes or Google Play Store to download the sPOD app 
  • Bluetooth 4.0 compatible 
  • Compatible with Android devices running 8.0 Oreo (API 26) or later 
  • Compatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini 
  • Must have existing sPOD system

sPOD SourceLT Wireless Switch Controller – Jeep JL/JT

Have the freedom to control anywhere with the sPOD™ SourceLT wireless switch controller for the Jeep JL/JT 2018-on. Designed to be paired with the sPOD™ app on your phone or tablet while saving hours on wiring and installation time. It is a small solid-state 6-circuit control system that provides a clean and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT power control module, the mounting location options are endless! No cutting, fishing wires into the cab or tapping into the vehicle ‘s electrical system. With the included Jeep specific mounting bracket, there’s no guess work on where to mount the SourceLT power control module under your hood. It’s the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone. Pair the BantamX with the sPOD app on your phone or tablet, you have a controller that can be used anywhere. Backed by sPOD’s 5-year manufacturer warranty*, stay in control with the sPOD™ SourceLT power management system. Download the sPOD app from Apple App Store or Google Play.

sPOD Jeep JL/JT kit includes the following:

  • (1) SourceLT System
  • (1) 84” Battery Cable Set
  • (1) Universal Mounting Bracket
  • All necessary hardware

Specs for the SourceLT:

  • 6 circuits rated at 30 amps at 12.5 VDC per circuit
  • 12-position terminal block
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC
  • Built in Bluetooth capabilities for remote control

sPOD BantamX Wireless Switch Controller – Jeep JL/JT

Experience ultimate control from anywhere with the sPOD BantamX wireless switch controller, designed specifically for Jeep JL/JT models. Paired with the sPOD app on your phone or tablet, this system saves hours on wiring and installation.

The BantamX is a compact, solid-state 8-circuit (expandable) control system that safely powers and manages 12/24VDC accessories. Its small size allows endless mounting options, eliminating the need for cutting, fishing wires into the cab, or tapping into your vehicle’s electrical system. With the included Jeep-specific mounting bracket, installing the BantamX under the hood is hassle-free. This versatile system is the perfect solution for all your aftermarket electrical accessories.

Backed by sPOD’s 5-year manufacturer warranty*, the BantamX power management system keeps you in control wherever you are. Download the sPOD app from the Apple App Store or Google Play and take command of your Jeep’s electrical accessories with ease.

 

Key Features:

  • Wireless Control Anywhere: Pair with the sPOD app on your phone or tablet for seamless operation.
  • Compact Design: Endless mounting options with no need for cutting or wiring modifications.
  • Jeep-Specific Mounting: Comes with a bracket designed for easy under-hood installation.
  • Powerful & Expandable: 8 circuits (expandable), 30 amps at 12.5 VDC per circuit, and built-in Bluetooth capabilities for remote control.

What’s Included:

  • BantamX System
  • 84” Battery Cable Set
  • Universal Mounting Bracket
  • All Necessary Hardware

Specifications:

  • 16-position terminal block for easy accessory connections
  • x2 RJ45 controller ports for Ethernet cables
  • Integrated low voltage cutoff battery protection with optional override
  • 100 amp in-line fuse
  • Operates on 12VDC or 24VDC

BantamX Touchscreen – Jeep JL/JT

NOTE: This system will not fit the Jeep Wrangler 392 V8.

The BantamX simplifies your wiring and installation process, saving you hours of work. This compact, expandable 8-circuit control system allows you to power and manage 12/24VDC accessories with just one Ethernet cable into the cab. Its small footprint offers endless placement options, with no cutting, fishing wires, or tapping into the vehicle’s electrical system required. The BantamX is the ultimate solution for all your aftermarket electrical needs, unmatched in versatility. 

Key Features: 

  • Fully Programmable System: Control up to 8 circuits, each rated at 30 amps (12.5 VDC). 
    Expandable & Easy to Install: 16-position terminal block for accessories, 2 RJ45 controller ports, and a 100-amp inline fuse.
  • Battery Protection: Integrated low voltage cutoff (LVCO) with optional override and self-healing fault protection. 
    Advanced Tech: Microprocessor-controlled MOSFETs (no fuses/relays), built-in Bluetooth for remote control, and current-sensing capabilities.
  • Safety Features: Protection against overheating, over-current, shorts, reverse polarity, and field collapse. Optional ignition control and safety lockout for switches 1 and 2. 

Hardware: 

Durable Build: Powder-coated steel base, weatherproof silicone gasket, and aluminum lid with easy-to-use thumb screws. 
Flexible Mounting: Universal and vehicle-specific options available. 

 

sPOD Mobile App Control (Free): 

Customize switches with dimming, strobe, flash, momentary, and switch linking options. 

Choose between On-Road and Off-Road modes.
 
Circuit timers, switch lockout, enhanced fault protection, and more. 
Advanced customization options like programmable current limiting and ignition control for all 8 circuits. 

Touchscreen Control Panel: 

  • Streamlined Installation: Control 8 switches simultaneously, reducing complexity and weight.
  • Real-Time Monitoring: Voltage feedback, amperage meter, and board temperature feedback on screen.
  • Customizable Display: Automatic backlighting, power-off features, and personalized legends.
  • Multiple Source Control: One touchscreen can manage up to 32 circuits.
  • Bluetooth Programming: For easy touchscreen setup (range may vary). 

Note: The touchscreen may become inoperable below 20°F. Allow the cab to warm up before use. 

The BantamX offers unparalleled functionality and ease, making it the perfect choice for managing your vehicle’s aftermarket accessories. 

Additional Touchscreen Mounting Options (sold separately):

RAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)
RAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)
RAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)

 

BantamX Touchscreen – Jeep JL V8

The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• Fully programmable, digital controlled system
• 8 circuits rated at 30 amps at 12.5 VDC per circuit
• 16-position terminal block (easily attach accessories)
• 2 controller ports (RJ45) for Ethernet cables
• Integrated low voltage cutoff (LVCO) battery protection w/ optional override
• One ATM mini-style fuse for LVCO protection & reset
• Failsafe self-healing fault protection system (from 1.5 to 30amps)
• Current-sensing MOSFETs controlled by a microprocessor (no fuses & relays)
• 100amp in-line fuse
• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
• Operates on 12VDC or 24VDC
• 8-position input terminal block for controlling outputs
• Built-in Bluetooth capabilities for remote control
• Protection against: overheating, over-current, shorts, reverse polarity & field collapse
• Ignition control and safety lock-out for switches 1 and 2 (optional)
• Up to 4 BantamX units can be daisy chained & controlled by one Touchscreen
• On-demand wireless software updates/upgrades

HARDWARE:

• Powder coated steel base w/ built in hardware
• Silicone gasket for weatherproofing
• Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement
• Universal & vehicle specific mounting options
• Robust insulated base and cover

FEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):

Each switch can be programmed for:
• Dimming
• Strobe
• Flash
• Momentary
• Switch Linking
• On Road and Off Road mode of operation

The following features are only available through the purchase of our Pro-Series mobile App:
• Circuit timers
• Switch lockout
• Initial startup current for each circuit is raised to 65amps for 5 seconds
• Program any circuit to be always on while still maintaining fault protection
• Option to disable deep sleep mode
• Selectable auto restart after circuit shuts down from over current/short
• Programmable Current Limiting (in 2amp increments up to 30amps)
• Selectable auto restart for current limiting shut down
• Selectable “Latch” or “Momentary” actions for inputs
• Programmable ignition control for all 8 circuits
• Variable strobe function to create custom flash/strobe patterns

EXTERNAL CONTROLLER OPTIONS (not included with system and can only be used in conjunction with an sPOD controller)

• Third party switches
• Computers
• Arduino
• Raspberry Pi
• Alpine Audio systems KAC-001 head unit controller
• Sensors, thermostats, pressure switches, fan controllers & more

—-

TOUCHSCREEN CONTROL PANEL

Please note: 
The touchscreen display will become inoperable if ambient temperatures drop below 20 degrees F.

Let the temperature of the cab of the vehicle warm up before operation.

Touchscreen Benefits:

  • Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.
  • Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.
  • Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.
  • Increase in switch lifecycle over traditional electromechanical switches.

Touchscreen Control Module Features:

  • Voltage feedback (vehicles battery/alternator voltage)
  • Amperage meter for each switch gives you the status of how much current each accessory is drawing
  • Board temperature feedback (shown on screen)
  • Customization: legends (3 lines of text)
  • Automatic backlighting off after 30 minutes of being inactivity
  • Automatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)
  • One touch off function
  • One second hold on off button shuts all circuits down
  • Automatic system shut down when the touchscreen is unplugged
  • Backlight dimming
  • Multiple Source select (One touchscreen can control up to 32 circuits)
  • Come with its own mounting bracket.
  • Bluetooth for use in programming the touchscreen. *

    *The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range. Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations. Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.

Additional Touchscreen Mounting Options (sold separately):

RAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)
RAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)
RAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)

 

BantamX HD for JL/JT – Jeep JL/JT

 NOTE: This system will not fit the Jeep Wrangler 392 V8.

The BantamX HD system for the Jeep JL/JT is your go-to solution for simplifying wiring and installation. This compact, 8-circuit (expandable) control system powers and manages 12/24VDC accessories with just a single Ethernet cable into the cab. With the Jeep-specific mounting bracket and small footprint, installing the BantamX under the hood is hassle-free. This versatile system is the perfect solution for all your aftermarket electrical accessories without the need for cutting, fishing wires, or tapping into your vehicle’s electrical system. It’s the ultimate solution for all your aftermarket electrical needs.

Backed by sPOD’s 5-year manufacturer warranty*, the BantamX power management system keeps you in control wherever you are. Download the sPOD app from the Apple App Store or Google Play and take command of your Jeep’s electrical accessories with ease.

 

 

Key Features:

  • Programmable System: 8 circuits, each rated at 30 amps at 12.5 VDC.
  • Easy Accessory Attachment: 16-position terminal block and 2 RJ45 controller ports for Ethernet cables.
  • Battery Protection: Integrated low voltage cutoff with optional override, and a 100-amp inline fuse.
  • Advanced Technology: Microprocessor-controlled MOSFETs (no fuses/relays) with built-in Bluetooth for remote control.

Safety Features: Protection against overheating, over-current, shorts, reverse polarity, and field collapse.

  • Optional Ignition Control: Safety lock-out for switches 1 and 2.

Hardware:

  • Durable Design: Powder-coated steel base, weatherproof silicone gasket, and aluminum lid with thumb screw fastening.
  • Flexible Mounting: Universal and vehicle-specific options available.
  • Robust Construction: Insulated base and cover for added protection.

sPOD Mobile App (Free):

  • Switch Customization: Program each switch for dimming, strobe, flash, momentary, and switch linking.
  • Operation Modes: Choose between On-Road and Off-Road modes.
  • Pro-Series Mobile App Features (Available for Purchase):
  • Advanced Controls: Circuit timers, switch lockout, programmable current limiting, and more.
  • Enhanced Protection: Customize fault protection and deep sleep mode options.
  • Ignition Control: Programmable for all 8 circuits.
  • Custom Flash Patterns: Create variable strobe patterns.

 

HD Control Panel

  • The HD Control Panel is encased in durable, black powder-coated billet aluminum, featuring silicone-encapsulated tactile switches for reliable performance in harsh environments. Compact and versatile, this panel is designed for seamless integration and customization.

Key Features:

  • Compact Size: Smaller than an iPhone, with multiple mounting options.
  • Built-In Bluetooth LE: Program and control the system via the sPOD app on iOS and Android devices.
  • Customizable Switches: Program each switch for dimming, flash, momentary, strobe, and switch linking.
  • Backlit & Adjustable: RGB backlighting with customizable colors, brightness, and status indicators.
  • Safety & Security: Panel lock-out feature and additional HD smart controller option.
  • Connectivity: RJ45 jack for communication, and the panel can be located up to 25 feet from the source using standard CAT-6 Ethernet cable.

Note: Bluetooth range is limited due to the precision-machined billet aluminum housing, with a typical range of 5 to 15 feet depending on location and surroundings.

BantamX HD for Jeep JL V8 – Jeep JL V8

The BantamX HD system for the Jeep JL V8 models is a compact, 8-circuit (expandable) control system that simplifies wiring and installation for 12/24VDC accessories. It offers endless mounting options without the need for cutting, fishing wires, or tapping into the vehicle’s electrical system. With the Jeep JL V8-specific mounting bracket and small footprint, installing the BantamX under the hood is hassle-free. This versatile system is the perfect solution for all your aftermarket electrical accessories without the need for cutting, fishing wires, or tapping into your vehicle’s electrical system. It’s the ultimate solution for all your aftermarket electrical needs.

Key Features:

  • Digital Control: 8 circuits, 30 amps each at 12.5 VDC.
  • Accessory Attachment: 16-position terminal block, 2 RJ45 ports for Ethernet.
  • Battery Protection: Integrated low voltage cutoff (LVCO) with override.
  • Self-Healing Fault Protection: MOSFETs controlled by a microprocessor.
  • Bluetooth-Enabled: Remote control and wireless updates.
  • Safety: Overheating, over-current, short circuit, and reverse polarity protection.

Hardware:

  • Durable Build: Powder-coated steel base, weatherproof silicone gasket.
  • Mounting: Jeep JL V8 Specific Mounting Plate

 

sPOD Mobile App:

  • Switch Customization: Program each switch for dimming, strobe, flash, momentary, and switch linking.
  • Operation Modes: Choose between On-Road and Off-Road modes.

External Controller Options:

  • Compatibility: Works with third-party switches, computers, and sensors.

HD Control Panel

  • The HD Control Panel is a rugged, compact unit designed to withstand harsh environments and seamlessly integrate with the BantamX system.

Key Features:

  • Durable: Black powder-coated billet aluminum housing.
  • Customizable Switches: Programmable for dimming, strobe, flash, and linking.