sPOD BantamX HD vehicle-specific kit for the Polaris Pro R (2022+) UTV has been designed specifically to integrate the sPOD HD panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to mount the control panel on the roof bar of your Pro R while having your BantamX tucked away at the lower foot panel.
The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. NOTE: The PCM bracket in this kit will interfere with aftermarket accessories mounted on the passager footwell.
This setup includes the following:
- (1) BantamX System
- (1) 84” Battery Cable Set
- (1) HD Switch Panel
- (1) 10’ Ethernet Cable
- (2) Mounting Bracket
- All necessary hardware
Specs for the BantamX:
- 8 circuits rated at 30 amps at 12.5 VDC per circuit
- 16-position terminal block
- 2 controller ports (RJ45) for Ethernet cables
- Integrated low voltage cutoff battery protection w/ optional override
- 100 amp in-line fuse
- Operates on 12 VDC or 24 VDC
- Built in Bluetooth capabilities for remote control
The sPOD SourceLT Mini6 Steering Wheel Kit is designed to seamlessly integrate into the steering wheel of the Polaris RZR Pro R, Turbo R, and Pro XP, giving you the power to control up to 6 accessories, each with a 30-amp rating, for a total of 100 amps. Say goodbye to the hassle of searching for switches on the dash and say hello to effortless, thumb-activated control.
- Effortless Control at Your Fingertips: Mounted directly onto your steering wheel, the sPOD SourceLT Mini 6 brings your accessory controls to your fingertips. With a simple swipe of your thumb, you can focus on driving without worrying about the location of your switches. It’s the ultimate in convenience and safety.
- Seamless Integration: The sPOD system is ingeniously designed to fit seamlessly onto your steering wheel, ensuring a perfect fit and finish. No more bulky, inconvenient control panels – it’s all right there where you need it.
- Coiled Cable for Smooth Operation: Located under the plate where the sPOD resides is a coiled cable, ensuring that you won’t encounter any binding issues when turning your wheel from lock to lock. Your steering remains as responsive as ever, even with the sPOD in place.
- Easy Installation: Connecting your accessories is a breeze. A single ethernet cable runs discreetly behind your dashboard to the Source LT unit, which is conveniently mounted in the footwell. There is no need for relays, wiring looms, or circuit fuses, making it one of the simplest solid-state power management systems on the market.
- Built-in Battery Protection: The sPOD SourceLT Mini 6 is not only about convenience but also about safety. It features a 12-position terminal block with integrated low-voltage cutoff battery protection, ensuring your vehicle’s electrical system remains reliable and secure.
With its intuitive design, the sPOD SourceLT Mini 6 Steering Wheel Kit offers you a level of control and convenience that is second to none.
NOTE: The PCM bracket in this kit will interfere with aftermarket accessories mounted on the passenger footwell.
This setup includes the following:
- (1) SourceLT System
- (1) 84” Battery Cable Set
- (1) Mini6 Switch Panel
- (1) Ethernet Cable
- (3) Mounting Bracket
- All necessary hardware
Specs for the SourceLT:
- Control up to 6 accessories with ease.
- 30 amps per channel, 100 amps of total power management capacity.
- Seamless integration with your vehicle’s steering wheel.
- Coiled cable design for unrestricted wheel movement.
- Simplified installation with no relays or circuit fuses.
- Integrated low-voltage cutoff battery protection.
- 12-position terminal block for enhanced connectivity.
- Bluetooth control, flash, dimming, strobe, momentary
- Direct integration for the Polaris RZR Pro XP, Turbo R, and Pro R models
The 8 Switch setup includes the following:
- (1) BantamX System
- (1) 84” Battery Cable Set
- (1) 8 LED Switch Panel
- (1) 10’ Ethernet Cable
- (1) Mounting Bracket
- All necessary hardware
Specs for the BantamX:
- 8 circuits rated at 30 amps at 12.5 VDC per circuit
- 16-position terminal block
- 2 controller ports (RJ45) for Ethernet cables
- Integrated low voltage cutoff battery protection w/ optional override
- 100 amp in-line fuse
- Operates on 12 VDC or 24 VDC
- Built in Bluetooth capabilities for remote control
The 6 Switch setup includes the following:
- (1) SourceLT System
- (1) 84” Battery Cable Set
- (1) 6 LED Switch Panel
- (1) 10’ Ethernet Cable
- (1) Mounting Bracket
- All necessary hardware
Specs for the SourceLT:
- 6 circuits rated at 30 amps at 12.5 VDC per circuit
- 12-position terminal block
- Integrated low voltage cutoff battery protection w/ optional override
- 100 amp in-line fuse
- Operates on 12 VDC or 24 VDC
- Built in Bluetooth capabilities for remote control
The 8 Switch setup includes the following:
- (1) BantamX System
- (1) 84” Battery Cable Set
- (1) 8 LED Switch Panel
- (1) 10’ Ethernet Cable
- (1) Mounting Bracket
- All necessary hardware
Specs for the BantamX:
- 8 circuits rated at 30 amps at 12.5 VDC per circuit
- 16-position terminal block
- 2 controller ports (RJ45) for Ethernet cables
- Integrated low voltage cutoff battery protection w/ optional override
- 100 amp in-line fuse
- Operates on 12 VDC or 24 VDC
- Built in Bluetooth capabilities for remote control
The 6 Switch setup includes the following:
- (1) SourceLT System
- (1) 84” Battery Cable Set
- (1) 6 LED Switch Panel
- (1) 10’ Ethernet Cable
- (1) Mounting Bracket
- All necessary hardware
Specs for the SourceLT:
- 6 circuits rated at 30 amps at 12.5 VDC per circuit
- 12-position terminal block
- Integrated low voltage cutoff battery protection w/ optional override
- 100 amp in-line fuse
- Operates on 12 VDC or 24 VDC
- Built in Bluetooth capabilities for remote control