Fender mounting bracket for Jeep JL/JT applications. This bracket is used to mount BantamX or SourceLT control systems.
test
Fitment: 2021 Jeep Gladiator
SourceLT w/ Mini6 for Jeep JL/JT – Jeep JL/JT
The SourceLT w/Mini6 for the Jeep JL/JT will save hours of wiring & installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.
- 6 circuits rated at 30 amps at 12.5 VDC per circuit
- 12-position terminal block (easily attach accessories)
- Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller
- Integrated low voltage cutoff (LVCO) battery protection w/ optional override
- Self-healing fault protection circuits (from 1.5 to 30amps)
- Current-sensing MOSFETs controlled by a microprocessor (no fuses & no relays)
- 100amp in-line fuse
- Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
- Operates on 12VDC
- Built-in Bluetooth capabilities for remote control
- Protection against: overheating, over-current, shorts, reverse polarity and field collapse
- On-demand wireless software updates/upgrades
HARDWARE:
- Powder coated steel base w/ built in hardware
- Silicone gasket for weatherproofing
- Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends
- Universal & vehicle specific mounting options
- Robust insulated base and cover
MINI6 CONTROL PANEL:
- Panel Dimensions: 2.062″ W x 3.260″ L x .375″ D
- Programmable modes: momentary / latch and backlight brightness level
- Visual feedback circuit ON indicator light for each button
- Includes one sheet of 72 standard legends
- Power-saving Deep Sleep Mode: Deactivates after 6 hours of inactivity
- Silicone buttons for easy touch activation
- Can run in conjunction with a 6-switch panel
- CAT-6 Ethernet connected (up to 25 feet from SourceLT)
FEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):
Each switch can be programmed for:
- Dimming
- Strobe
- Flash
- Momentary
- Switch Linking
- On-Road and Off-Road mode of operation
BLUETOOTH REQUIREMENTS:
- Access to iTunes or Google Play Store to download the sPOD app
- Bluetooth 4.0 compatible
- Compatible with Android devices running 8.0 Oreo (API 26) or later
- Compatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini
- Must have existing sPOD system
Ram Tough-Track – Jeep 2018-2023 Wrangler JL; 2018-2023 Gladiator
RAM® Tough-Track™ for 18-19′ Jeep JL/Gladiator
Features
RAM Mount
- Integrates into dash of compatible Jeep vehicles using OEM screws, with no drilling or modifications necessary
- Dash mounting plate, 12″ RAM® Tough-Track™, and hardware included; compatible with RAM® Track Ball™ bases
- Made of powder-coated steel and high-strength composites for durability and reliability in the most demanding environments
!!! NOTE !!! Requires the RAM® Track Ball™ with T-Bolt Attachment
https://www.4x4spod.com/ram%C2%AE_track_ball%E2%84%A2_t_bolt_attachment
CMM A-Pillar 1 Inch Ball Mount Solution – Jeep 2018-2023 Wrangler JL; 2018-2023 Gladiator
Carolina Metal Masters (CMM) Offroad A-Pillar Ball Mount Solution for Jeep JL and JT
- 3D machined insert made out of 6061 Aluminum and Anodized Black.
- 1” ball Mount for electronic devices such as cell phones, GPS, sPOD touch screen, etc.
- Can be used in any of the 4 locations, above or below the factory A-Pillar handle
- It can be added to the front only!
Comes with:
- (1) 1” ball mount
- (1) 3D machined base
- All Hardware
This product is a quick install. No drilling or cutting needed. Remove the existing cover panel, replaced with the CMM Offroad insert and inserting one bolt into the factory hole.
—-
Suggested add-ons (sold separately):
RAM Mount Double Socket Arm (Part No. RAP-B-201U-A or RAM-B-201U)
The Double socket arm has a socket at both ends that accommodates 1″ balls. RAM’s socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.
RAM 1/4-20 Female Threaded Hole with 1″ Ball (Part No. RAM-B-348U)
The RAM-B-348U includes a 1/4″-20 female thread connected to a 1″ rubber ball. This can be added to the back of the HD or Touchscreen for additional mounting options.
sPOD SourceLT Wireless Switch Controller – Jeep, JL/JT 392 V8 2018-On
Have the freedom to control anywhere with the sPOD™ SourceLT wireless switch controller for the Jeep JK 2007-2018. Designed to be paired with the sPOD™ app on your phone or tablet while saving hours on wiring and installation time. It is a small solid-state 6-circuit control system that provides a clean and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT power control module, the mounting location options are endless! No cutting, fishing wires into the cab or tapping into the vehicle ‘s electrical system. With the included Jeep specific mounting bracket, there’s no guess work on where to mount the SourceLT power control module under your hood. It’s the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone. Pair the BantamX with the sPOD app on your phone or tablet, you have a controller that can be used anywhere. Backed by sPOD’s 5-year manufacturer warranty*, stay in control with the sPOD™ SourceLT power management system. Download the sPOD app from Apple App Store or Google Play.
sPOD Jeep JK kit includes the following:
- (1) SourceLT System
- (1) 84” Battery Cable Set
- (1) Universal Mounting Bracket
- All necessary hardware
Specs for the SourceLT:
- 6 circuits rated at 30 amps at 12.5 VDC per circuit
- 12-position terminal block
- Integrated low voltage cutoff battery protection w/ optional override
- 100 amp in-line fuse
- Operates on 12 VDC
- Built in Bluetooth capabilities for remote control
sPOD SourceLT Wireless Switch Controller – Jeep JL/JT
Have the freedom to control anywhere with the sPOD™ SourceLT wireless switch controller for the Jeep JL/JT 2018-on. Designed to be paired with the sPOD™ app on your phone or tablet while saving hours on wiring and installation time. It is a small solid-state 6-circuit control system that provides a clean and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT power control module, the mounting location options are endless! No cutting, fishing wires into the cab or tapping into the vehicle ‘s electrical system. With the included Jeep specific mounting bracket, there’s no guess work on where to mount the SourceLT power control module under your hood. It’s the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone. Pair the BantamX with the sPOD app on your phone or tablet, you have a controller that can be used anywhere. Backed by sPOD’s 5-year manufacturer warranty*, stay in control with the sPOD™ SourceLT power management system. Download the sPOD app from Apple App Store or Google Play.
sPOD Jeep JL/JT kit includes the following:
- (1) SourceLT System
- (1) 84” Battery Cable Set
- (1) Universal Mounting Bracket
- All necessary hardware
Specs for the SourceLT:
- 6 circuits rated at 30 amps at 12.5 VDC per circuit
- 12-position terminal block
- Integrated low voltage cutoff battery protection w/ optional override
- 100 amp in-line fuse
- Operates on 12 VDC
- Built in Bluetooth capabilities for remote control
sPOD BantamX Wireless Switch Controller – Jeep, JL/JT 392 V8 2018-On
Have the freedom to control anywhere with the sPOD™ BantamX wireless switch controller for the Jeep Jeep JL/JT 392 V8 2018-On. Designed to be paired with the sPOD™ app on your phone or tablet while saving hours on wiring and installation time. It is a small solid-state 8-circuit (expandable) control system that provides a clean and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX power control module, the mounting location options are endless! No cutting, fishing wires into the cab or tapping into the vehicle ‘s electrical system. With the included Jeep specific mounting bracket, there’s no guess work on where to mount the BantamX power control module under your hood. It’s the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone. Pair the BantamX with the sPOD app on your phone or tablet, you have a controller that can be used anywhere. Backed by sPOD’s 5-year manufacturer warranty*, stay in control with the sPOD™ BantamX power management system. Download the sPOD app from Apple App Store or Google Play.
sPOD Jeep JL/JT 392 V8 2018-On kit includes the following:
- (1) BantamX System
- (1) 84” Battery Cable Set
- (1) Universal Mounting Bracket
- All necessary hardware
Specs for the BantamX:
- 30 amps at 12.5 VDC per circuit
- 16-position terminal block
- 2 controller ports (RJ45) for Ethernet cables
- Integrated low voltage cutoff battery protection w/ optional override
- 100 amp in-line fuse
- Operates on 12 VDC or 24 VDC
Built in Bluetooth capabilities for remote control
sPOD BantamX Wireless Switch Controller – Jeep JL/JT
Have the freedom to control anywhere with the sPOD™ BantamX wireless switch controller for the Jeep JL/JT 2018-on. Designed to be paired with the sPOD™ app on your phone or tablet while saving hours on wiring and installation time. It is a small solid-state 8-circuit (expandable) control system that provides a clean and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX power control module, the mounting location options are endless! No cutting, fishing wires into the cab or tapping into the vehicle ‘s electrical system. With the included Jeep specific mounting bracket, there’s no guess work on where to mount the BantamX power control module under your hood. It’s the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone. Pair the BantamX with the sPOD app on your phone or tablet, you have a controller that can be used anywhere. Backed by sPOD’s 5-year manufacturer warranty*, stay in control with the sPOD™ BantamX power management system. Download the sPOD app from Apple App Store or Google Play.
sPOD Jeep JL/JT kit includes the following:
- (1) BantamX System
- (1) 84” Battery Cable Set
- (1) Universal Mounting Bracket
- All necessary hardware
Specs for the BantamX:
- 30 amps at 12.5 VDC per circuit
- 16-position terminal block
- 2 controller ports (RJ45) for Ethernet cables
- Integrated low voltage cutoff battery protection w/ optional override
- 100 amp in-line fuse
- Operates on 12 VDC or 24 VDC
- Built in Bluetooth capabilities for remote control
BantamX Touchscreen – Jeep JL/JT
!!! NOTE !!! This system will not fit the Jeep Wrangler 392 V8.
The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.
• Fully programmable, digital controlled system
• 8 circuits rated at 30 amps at 12.5 VDC per circuit
• 16-position terminal block (easily attach accessories)
• 2 controller ports (RJ45) for Ethernet cables
• Integrated low voltage cutoff (LVCO) battery protection w/ optional override
• One ATM mini-style fuse for LVCO protection & reset
• Failsafe self-healing fault protection system (from 1.5 to 30amps)
• Current-sensing MOSFETs controlled by a microprocessor (no fuses & relays)
• 100amp in-line fuse
• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
• Operates on 12VDC or 24VDC
• 8-position input terminal block for controlling outputs
• Built-in Bluetooth capabilities for remote control
• Protection against: overheating, over-current, shorts, reverse polarity & field collapse
• Ignition control and safety lock-out for switches 1 and 2 (optional)
• Up to 4 BantamX units can be daisy chained & controlled by one Touchscreen
• On-demand wireless software updates/upgrades
HARDWARE:
• Powder coated steel base w/ built in hardware
• Silicone gasket for weatherproofing
• Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement
• Universal & vehicle specific mounting options
• Robust insulated base and cover
FEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):
Each switch can be programmed for:
• Dimming
• Strobe
• Flash
• Momentary
• Switch Linking
• On Road and Off Road mode of operation
The following features are only available through the purchase of our Pro-Series mobile App:
• Circuit timers
• Switch lockout
• Initial startup current for each circuit is raised to 65amps for 5 seconds
• Program any circuit to be always on while still maintaining fault protection
• Option to disable deep sleep mode
• Selectable auto restart after circuit shuts down from over current/short
• Programmable Current Limiting (in 2amp increments up to 30amps)
• Selectable auto restart for current limiting shut down
• Selectable “Latch” or “Momentary” actions for inputs
• Programmable ignition control for all 8 circuits
• Variable strobe function to create custom flash/strobe patterns
EXTERNAL CONTROLLER OPTIONS (not included with system and can only be used in conjunction with an sPOD controller)
• Third party switches
• Computers
• Arduino
• Raspberry Pi
• Alpine Audio systems KAC-001 head unit controller
• Sensors, thermostats, pressure switches, fan controllers & more
—-
TOUCHSCREEN CONTROL PANEL
Please note:
The touchscreen display will become inoperable if ambient temperatures drop below 20 degrees F.
Let the temperature of the cab of the vehicle warm up before operation.
Touchscreen Benefits:
- Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.
- Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.
- Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.
- Increase in switch lifecycle over traditional electromechanical switches.
Touchscreen Control Module Features:
- Voltage feedback (vehicles battery/alternator voltage)
- Amperage meter for each switch gives you the status of how much current each accessory is drawing
- Board temperature feedback (shown on screen)
- Customization: legends (3 lines of text)
- Automatic backlighting off after 30 minutes of being inactivity
- Automatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)
- One touch off function
- One second hold on off button shuts all circuits down
- Automatic system shut down when the touchscreen is unplugged
- Backlight dimming
- Multiple Source select (One touchscreen can control up to 32 circuits)
- Come with its own mounting bracket.
- Bluetooth for use in programming the touchscreen. *
*The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range. Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations. Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.
Additional Touchscreen Mounting Options (sold separately):
RAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)
RAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)
RAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)
BantamX HD for JL/JT – Jeep JL/JT
!!! NOTE !!! This system will not fit the Jeep Wrangler 392 V8.
The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.
• Fully programmable, digital controlled system
• 8 circuits rated at 30 amps at 12.5 VDC per circuit
• 16-position terminal block (easily attach accessories)
• 2 controller ports (RJ45) for Ethernet cables
• Integrated low voltage cutoff (LVCO) battery protection w/ optional override
• One ATM mini-style fuse for LVCO protection & reset
• Failsafe self-healing fault protection system (from 1.5 to 30amps)
• Current-sensing MOSFETs controlled by a microprocessor (no fuses & relays)
• 100amp in-line fuse
• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
• Operates on 12VDC or 24VDC
• 8-position input terminal block for controlling outputs
• Built-in Bluetooth capabilities for remote control
• Protection against: overheating, over-current, shorts, reverse polarity & field collapse
• Ignition control and safety lock-out for switches 1 and 2 (optional)
• On-demand wireless software updates/upgrades
HARDWARE:
• Powder coated steel base w/ built in hardware
• Silicone gasket for weatherproofing
• Simple, thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement
• Universal & vehicle specific mounting options
• Robust insulated base and cover
FEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):
Each switch can be programmed for:
• Dimming
• Strobe
• Flash
• Momentary
• Switch Linking
• On Road and Off Road mode of operation
The following features are only available through the purchase of our Pro-Series mobile App:
• Circuit timers
• Switch lockout
• Initial startup current for each circuit is raised to 65amps for 5 seconds
• Program any circuit to be always on while still maintaining fault protection
• Option to disable deep sleep mode
• Selectable auto restart after circuit shuts down from over current/short
• Programmable Current Limiting (in 2amp increments up to 30amps)
• Selectable auto restart for current limiting shut down
• Selectable “Latch” or “Momentary” actions for inputs
• Programmable ignition control for all 8 circuits
• Variable strobe function to create custom flash/strobe patterns
EXTERNAL CONTROLLER OPTIONS (not included with system and can only be used in conjunction with an sPOD controller)
• Third party switches
• Computers
• Arduino
• Raspberry Pi
• Alpine Audio systems KAC-001 head unit controller
• Sensors, thermostats, pressure switches, fan controllers & more
—-
HD CONTROL PANEL
- Encased in an aluminum billet machined housing, powder coated black, utilizing tactile switches encapsulated in silicone.
- Silicone Buttons with positive touch feedback.
- Panel is designed to withstand the harshest environments with all weather conditions considered.
- Compact in size: 2-7/8W x 4-7/8L x 1/2 Thick (smaller than an iPhone).
- Universal back with two pressed-in 1/4-20 studs x 5/8 inches long for flat mounting.
- Standard universal articulating mount for a multitude of mounting options.
- One standard RJ45 jack on back for communication cable between HD panel and the BantamX. (HD comes with a 10 foot CAT-6 Ethernet cable)
- HD can be located up to 25 feet from the Source using standard CAT-6 Ethernet cable.
- Built in Bluetooth LE* allows you to program and control our system with iPhones, iPad, iPad Mini using the free sPOD app.
- Three levels of secured or open Bluetooth pairing/connectivity.
- Each switch programmable for dimming, flash, momentary, strobe, and switch linking (program any switch to be a master to control other switches).
- All 8 switches are backlit.
- Adjustable timer to turn backlight off and a simple touch on any switch to reactivate.
- Quickly turn backlight off by holding 2 designated buttons.
- RGB backlight color and intensity can be changed to any color to match vehicle interior dash lighting.
- Panel lock-out feature for safety and security.
- Legends can be applied (comes standard with one sheet of 72 legends).
- Each switch has 3 status lights: Red (left) = On, White (center) = Flash/Strobe active, Blue (right) = Active visual feedback when button is pushed.
- Status lights can be dimmed.
- Additional HD smart controller can be added for different locations.
- HD can run in conjunction with our Touchscreen, Bluetooth and 8 Switch panel.
Bluetooth Requirements:
- Access to iTunes or Google Play Store to download the sPOD app
- Bluetooth 4.0 compatible
- Compatible with Android devices running 8.0 Oreo (API 26) or later
- Compatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini
- Must have existing sPOD system
*The primary reason for the Bluetooth integrated into the HD panel is for programming purposes, and not for remote control due to the limited range. HD housings are precision machined billet aluminum which contribute to the distance limitations. Ranges may vary from 5 feet up to 15 feet depending on location of the HD, the surroundings, phone type, phone cover and many other variables.