2020 Jeep Wrangler JL Archives - 4x4 sPod
Bestop Family of Brands
BPAG Family of Brands
Learn About the Bestop Premium Accessories Group
Dealers
Help
Cart

Jeep

Trucks

Vans

UTV

Commercial

Select Your Vehicle
Can't find your vehicle?
Universal Systems
Shop
Wireless Systems
Shop
Brackets & Mounts
Legends
Shop By Product
Community
+ Add Your Vehicle
+ Add a Vehicle
ADD VEHICLE
Can't find your vehicle?

test

Fitment: 2020 Jeep Wrangler JL

CMM A-Pillar Ball Mount/Double Socket Short Arm Extension/1-inch Ball Mount Package for sPOD Controllers – Jeep JL/JT 2018-23

This sPOD 3-piece mounting kit will allow mounting of the sPOD mini6, HD and Touchscreen controllers to the inside a-pillar grab handle of 2018-2023 Jeep JL Wrangler and JT Gladiators. This kit includes the CMM A-Pillar Ball Mount that mounts to the grab handle, double socket short arm extension and 1-inch ball mount with 1/4 20 female threaded hole.  NOTE: sPOD Controller sold separately 

This package consists of the following: 

1/4-20 Female Threaded Hole w/ 1 Inch Ball

The 1/4″-20 female thread connected to a 1″ rubber ball. This can be added to the back of the HD or Touchscreen for additional mounting options to RAM -specific mounting systems. SKU: 200244

 

Double socket short arm extension for 1-inch ball

This high-quality double socket extension arm from sPOD is engineered to fit 1-inch B-size ball bases, device holders, and mounting adapters. With an overall length of 2.25 inches, the sPOD double socket extension arm offers near-infinite adjustability for customized positioning and optimal viewing angles—perfect for off-road, overland, and UTV setups using sPOD controllers such as Mini6, Touchscreen and HD smart panel. 

 

CMM A-Pillar 1-inch Ball Mount – Jeep JL/JT 2018-23

Carolina Metal Masters (CMM) Offroad A-Pillar Ball Mount Solution for Jeep JL and JT is specific to the 2018-23 JL/JT models. This CMM mount is 3D machined insert made out of 6061 aluminum and black anodized for a clean look. This product is a quick install. No drilling or cutting needed. Remove the existing cover panel, replaced with the CMM Offroad insert and inserting one bolt into the factory hole. 

  • Year Specific models: 2018-2023 JL/JT Models
  • 3D machined insert made out of 6061 Aluminum and Anodized Black. 
  • 1” ball Mount for electronic devices such as cell phones, GPS, sPOD touch screen, etc.
  • Can be used in any of the 4 locations, above or below the factory A-Pillar handle
  • It can be added to the front only! 

NOTE: sPOD Controller sold separately 

 

SourceLT w/ Mini6 for Jeep JL/JT – Jeep JL/JT

The SourceLT w/Mini6 for the Jeep JL/JT will save hours of wiring & installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

  • 6 circuits rated at 30 amps at 12.5 VDC per circuit
  • 12-position terminal block (easily attach accessories)
  • Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller
  • Integrated low voltage cutoff (LVCO) battery protection w/ optional override
  • Self-healing fault protection circuits (from 1.5 to 30amps)
  • Current-sensing MOSFETs controlled by a microprocessor (no fuses & no relays)
  • 100amp in-line fuse
  • Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
  • Operates on 12VDC
  • Built-in Bluetooth capabilities for remote control
  • Protection against: overheating, over-current, shorts, reverse polarity and field collapse
  • On-demand wireless software updates/upgrades 

HARDWARE:

  • Powder coated steel base w/ built in hardware
  • Silicone gasket for weatherproofing
  • Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends
  • Universal & vehicle specific mounting options
  • Robust insulated base and cover

MINI6 CONTROL PANEL:

  • Panel Dimensions: 2.062″ W x 3.260″ L x .375″ D
  • Programmable modes: momentary / latch and backlight brightness level
  • Visual feedback circuit ON indicator light for each button
  • Includes one sheet of 72 standard legends
  • Power-saving Deep Sleep Mode: Deactivates after 6 hours of inactivity
  • Silicone buttons for easy touch activation
  • Can run in conjunction with a 6-switch panel
  • CAT-6 Ethernet connected (up to 25 feet from SourceLT)

 

FEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):

Each switch can be programmed for:

  • Dimming
  • Strobe
  • Flash
  • Momentary
  • Switch Linking
  • On-Road and Off-Road mode of operation

BLUETOOTH REQUIREMENTS:

  • Access to iTunes or Google Play Store to download the sPOD app 
  • Bluetooth 4.0 compatible 
  • Compatible with Android devices running 8.0 Oreo (API 26) or later 
  • Compatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini 
  • Must have existing sPOD system

Ram Tough-Track – Jeep 2018-2023 Wrangler JL; 2018-2023 Gladiator

RAM® Tough-Track™ for 18-19′ Jeep JL/Gladiator 

Features 

RAM Mount

  • Integrates into dash of compatible Jeep vehicles using OEM screws, with no drilling or modifications necessary
  • Dash mounting plate, 12″ RAM® Tough-Track™, and hardware included; compatible with RAM® Track Ball™ bases
  • Made of powder-coated steel and high-strength composites for durability and reliability in the most demanding environments

!!! NOTE !!!  Requires the RAM® Track Ball™ with T-Bolt Attachment

https://www.4x4spod.com/ram%C2%AE_track_ball%E2%84%A2_t_bolt_attachment

CMM A-Pillar 1-Inch Ball Mount Solution – Jeep 2018-23 Jeep JL Wrangler/JT Gladiator

Carolina Metal Masters (CMM) Offroad A-Pillar Ball Mount Solution for Jeep JL and JT

  • Year Specific models: 2018-2023 JL/JT Models
  • 3D machined insert made out of 6061 Aluminum and Anodized Black. 
  • 1” ball Mount for electronic devices such as cell phones, GPS, sPOD touch screen, etc.
  • Can be used in any of the 4 locations, above or below the factory A-Pillar handle
  • It can be added to the front only! 

Comes with:

  • (1) 1” ball mount
  • (1) 3D machined base
  • All Hardware

This product is a quick install. No drilling or cutting needed. Remove the existing cover panel, replaced with the CMM Offroad insert and inserting one bolt into the factory hole. 

—-

Suggested add-ons (sold separately):

RAM Mount Double Socket Arm for 1-inch ball (PN: 860245)
The Double socket arm has a socket at both ends that accommodates 1″ balls. RAM’s socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.

1/4-20 Female Threaded Hole with 1-inch ball (PN: 200244)
1/4″-20 female thread connected to a 1″ rubber ball. This can be added to the back of the HD or Touchscreen for additional mounting options.

 

sPOD SourceLT Wireless Switch Controller – Jeep, JL/JT 392 V8 2018-On

Have the freedom to control anywhere with the sPOD™ SourceLT wireless switch controller for the Jeep JK 2007-2018. Designed to be paired with the sPOD™ app on your phone or tablet while saving hours on wiring and installation time. It is a small solid-state 6-circuit control system that provides a clean and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT power control module, the mounting location options are endless! No cutting, fishing wires into the cab or tapping into the vehicle ‘s electrical system. With the included Jeep specific mounting bracket, there’s no guess work on where to mount the SourceLT power control module under your hood. It’s the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone. Pair the BantamX with the sPOD app on your phone or tablet, you have a controller that can be used anywhere. Backed by sPOD’s 5-year manufacturer warranty*, stay in control with the sPOD™ SourceLT power management system. Download the sPOD app from Apple App Store or Google Play.

sPOD Jeep JK kit includes the following:

  • (1) SourceLT System
  • (1) 84” Battery Cable Set
  • (1) Universal Mounting Bracket
  • All necessary hardware

Specs for the SourceLT:

  • 6 circuits rated at 30 amps at 12.5 VDC per circuit
  • 12-position terminal block
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC
  • Built in Bluetooth capabilities for remote control

sPOD SourceLT Wireless Switch Controller – Jeep JL/JT

Have the freedom to control anywhere with the sPOD™ SourceLT wireless switch controller for the Jeep JL/JT 2018-on. Designed to be paired with the sPOD™ app on your phone or tablet while saving hours on wiring and installation time. It is a small solid-state 6-circuit control system that provides a clean and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT power control module, the mounting location options are endless! No cutting, fishing wires into the cab or tapping into the vehicle ‘s electrical system. With the included Jeep specific mounting bracket, there’s no guess work on where to mount the SourceLT power control module under your hood. It’s the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone. Pair the BantamX with the sPOD app on your phone or tablet, you have a controller that can be used anywhere. Backed by sPOD’s 5-year manufacturer warranty*, stay in control with the sPOD™ SourceLT power management system. Download the sPOD app from Apple App Store or Google Play.

sPOD Jeep JL/JT kit includes the following:

  • (1) SourceLT System
  • (1) 84” Battery Cable Set
  • (1) Universal Mounting Bracket
  • All necessary hardware

Specs for the SourceLT:

  • 6 circuits rated at 30 amps at 12.5 VDC per circuit
  • 12-position terminal block
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC
  • Built in Bluetooth capabilities for remote control

sPOD BantamX Wireless Switch Controller – Jeep, JL/JT 392 V8 2018-On

Have the freedom to control anywhere with the sPOD™ BantamX wireless switch controller for the Jeep Jeep JL/JT 392 V8 2018-On. Designed to be paired with the sPOD™ app on your phone or tablet while saving hours on wiring and installation time. It is a small solid-state 8-circuit (expandable) control system that provides a clean and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX power control module, the mounting location options are endless! No cutting, fishing wires into the cab or tapping into the vehicle ‘s electrical system. With the included Jeep specific mounting bracket, there’s no guess work on where to mount the BantamX power control module under your hood. It’s the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone. Pair the BantamX with the sPOD app on your phone or tablet, you have a controller that can be used anywhere. Backed by sPOD’s 5-year manufacturer warranty*, stay in control with the sPOD™ BantamX power management system. Download the sPOD app from Apple App Store or Google Play.

sPOD Jeep JL/JT 392 V8 2018-On kit includes the following:

  • (1) BantamX System
  • (1) 84” Battery Cable Set
  • (1) Universal Mounting Bracket
  • All necessary hardware

Specs for the BantamX:

  • 30 amps at 12.5 VDC per circuit
  • 16-position terminal block
  • 2 controller ports (RJ45) for Ethernet cables
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC or 24 VDC

Built in Bluetooth capabilities for remote control

sPOD BantamX Wireless Switch Controller – Jeep JL/JT

Experience ultimate control from anywhere with the sPOD BantamX wireless switch controller, designed specifically for Jeep JL/JT models. Paired with the sPOD app on your phone or tablet, this system saves hours on wiring and installation.

The BantamX is a compact, solid-state 8-circuit (expandable) control system that safely powers and manages 12/24VDC accessories. Its small size allows endless mounting options, eliminating the need for cutting, fishing wires into the cab, or tapping into your vehicle’s electrical system. With the included Jeep-specific mounting bracket, installing the BantamX under the hood is hassle-free. This versatile system is the perfect solution for all your aftermarket electrical accessories.

Backed by sPOD’s 5-year manufacturer warranty*, the BantamX power management system keeps you in control wherever you are. Download the sPOD app from the Apple App Store or Google Play and take command of your Jeep’s electrical accessories with ease.

 

Key Features:

  • Wireless Control Anywhere: Pair with the sPOD app on your phone or tablet for seamless operation.
  • Compact Design: Endless mounting options with no need for cutting or wiring modifications.
  • Jeep-Specific Mounting: Comes with a bracket designed for easy under-hood installation.
  • Powerful & Expandable: 8 circuits (expandable), 30 amps at 12.5 VDC per circuit, and built-in Bluetooth capabilities for remote control.

What’s Included:

  • BantamX System
  • 84” Battery Cable Set
  • Universal Mounting Bracket
  • All Necessary Hardware

Specifications:

  • 16-position terminal block for easy accessory connections
  • x2 RJ45 controller ports for Ethernet cables
  • Integrated low voltage cutoff battery protection with optional override
  • 100 amp in-line fuse
  • Operates on 12VDC or 24VDC

BantamX Touchscreen – Jeep JL/JT

NOTE: This system will not fit the Jeep Wrangler 392 V8.

The BantamX simplifies your wiring and installation process, saving you hours of work. This compact, expandable 8-circuit control system allows you to power and manage 12/24VDC accessories with just one Ethernet cable into the cab. Its small footprint offers endless placement options, with no cutting, fishing wires, or tapping into the vehicle’s electrical system required. The BantamX is the ultimate solution for all your aftermarket electrical needs, unmatched in versatility. 

Key Features: 

  • Fully Programmable System: Control up to 8 circuits, each rated at 30 amps (12.5 VDC). 
    Expandable & Easy to Install: 16-position terminal block for accessories, 2 RJ45 controller ports, and a 100-amp inline fuse.
  • Battery Protection: Integrated low voltage cutoff (LVCO) with optional override and self-healing fault protection. 
    Advanced Tech: Microprocessor-controlled MOSFETs (no fuses/relays), built-in Bluetooth for remote control, and current-sensing capabilities.
  • Safety Features: Protection against overheating, over-current, shorts, reverse polarity, and field collapse. Optional ignition control and safety lockout for switches 1 and 2. 

Hardware: 

Durable Build: Powder-coated steel base, weatherproof silicone gasket, and aluminum lid with easy-to-use thumb screws. 
Flexible Mounting: Universal and vehicle-specific options available. 

 

sPOD Mobile App Control (Free): 

Customize switches with dimming, strobe, flash, momentary, and switch linking options. 

Choose between On-Road and Off-Road modes.
 
Circuit timers, switch lockout, enhanced fault protection, and more. 
Advanced customization options like programmable current limiting and ignition control for all 8 circuits. 

Touchscreen Control Panel: 

  • Streamlined Installation: Control 8 switches simultaneously, reducing complexity and weight.
  • Real-Time Monitoring: Voltage feedback, amperage meter, and board temperature feedback on screen.
  • Customizable Display: Automatic backlighting, power-off features, and personalized legends.
  • Multiple Source Control: One touchscreen can manage up to 32 circuits.
  • Bluetooth Programming: For easy touchscreen setup (range may vary). 

Note: The touchscreen may become inoperable below 20°F. Allow the cab to warm up before use. 

The BantamX offers unparalleled functionality and ease, making it the perfect choice for managing your vehicle’s aftermarket accessories. 

Additional Touchscreen Mounting Options (sold separately):

RAM-201U Double Socket Arm for 1-inch RAM Ball (Must have this in order to mount touchscreen)
RAM-238U Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)
RAM-224-1U Suction Cup Base with 1-inch RAM Ball (For fixed surface mounting and interconnect between double socket arm)