This month's behind the build, our Friends from Baja Designs had a chance to check out Harrison Schoen's 1985 Mercedes Benz 1300L Unimog at Overland Expo West 2025 - and let's just say it's one of the wildest builds out there. He is living in it full-time and currently traveling around the country with the goal of traversing to Argentina on the Pan-American Highway.https://www.youtube.com/watch?v=yl-2o_yImio Total Control At His Fingertips Harrison uses two sPOD BantamX power control modules mated to a touchscreen controller both inside the driver cab. He also has a touchscreen controller inside of his living quarters, giving him the flexibility to control all 35 of his Baja Designs lights and other powered accessories no matter where he is inside the vehicle.    "The goal behind this build is to live comfortably wherever I go, carry my motorcycle safely as I traverse down through South America to Argentina for two years" says Harrison of his build. Feeling like an Iron cowboy controlling 20,000 pounds of steel and aluminum, Harrison's Unimog is a crazy driving experience. Powered by a 5.7 Turbo Diesel making about 220 HP currently with a new turbo, Portal axles front and rear rolling on 46" Tires means this UNIMOG literally can go anywhere!This is by far one of the wildest overland rigs we have ever come across, and for Harrison it will be his home for the next two years during his adventure. sPOD is proud to be a part of Harrison's journey allowing him to be in total control of his rig!Follow along with Harrison on his journey: IG @harry.schoen sPOD Products used on Harrison's Build: sPOD BantamX Touchscreen - Universal Universal Starting At:$915.00 The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one... sPOD BantamX Add-on - Universal Universal Starting At:$575.00 This is an add-on BantamX for existing sPOD systems/controllers only! Controller not included. !!! NOTE !!! At least one sPOD controller must... Add-On Touchscreen - Universal Universal Starting At:$350.00 Add-On Touchscreen For 8 Circuit Systems (BantamX)Time to add a Touchscreen to your 8 Circuit systems? This can be added to your existing 8 circuit...

sPOD BantamX/HD Controller Kit for 2024-on Toyota TacomaThe sPOD BantamX HD Vehicle-Specific Kit for the 2024+ Toyota Tacoma is designed to seamlessly integrate the sPOD HD control panel into the vehicle’s cabin, providing a centralized and convenient place for accessory controls. This kit fits all Toyota Tacoma trim models, ensuring easy access to controls within arm’s reach. The BantamX power module offers eight power circuits, each supporting 30A per channel (100A total), and mounts inside the engine bay. For those needing more channels, the system can be expanded up to 32 circuits, all controlled by a single controller. With built-in sPODConnect Bluetooth technology, users can program and control their accessories from any iOS or Android device via the sPOD app. The system offers a wide range of programming options, including output dimming, strobing, flashing, master-slave functions, memory settings, auto power-up, momentary options, switch linking, and more. Backed by a 5-year manufacturer’s warranty, sPOD offers reliable, worry-free power management, giving total control of the Tacoma’s accessory setup.Key Features:Effortless Control at Your Fingertips: The sPOD HD smart panel brings your accessory controls to your fingertips. It’s the ultimate in convenience and safety.Programmable Modes: Have access to advanced features such as strobe, dimming, flash, momentary and switch linking.Adjustable Back-lit RGB color:Customize your HD smart panel controller backlight.Easy Installation: Connecting your accessories is a breeze. A single ethernet cable runs discreetly from the BantamX unit to the Touchscreen in your cab. There is no need for relays, wiring looms, or circuit fuses, making it one of the simplest solid-state power management systems on the market.Built-in Battery Protection: The sPOD BantamX Touchscreen is not only convenient but also safe. It features a 16-position terminal block with our integrated LVCO low-voltage cutoff battery protection that monitors and protects, ensuring your vehicle’s electrical system remains reliable and secure.Input Control: Automate functions for all switch circuits – sPOD’s system gives customers full control over their accessories, allowing them to monitor and adjust settings as required by integrating factory wiring to take control a step further.uLINK™ System Scalability: Allows for expansion of up to 32 channels by linking additional BantamX power control modules, all controlled by one controller.Multi Controller Ready: The BantamX has 2 controller ports built in, allowing for 2 different controllers options per one system.Kit Includes: (1x) BantamX System (1x) 84” Battery Cable Set (1x) HD Switch Panel(1x) Ethernet Cable(1x) Mounting BracketAll necessary hardwareAll necessary hardware SHOP NOW BantamX Upfitter Kit for 2024-on Toyota TacomaThe BantamX Upfitter system for the 2024-on Toyota Tacoma is specifically engineered to integrate with the factory upfitter switches. This Connect&Go™ system is designed to mount seamlessly into the engine bay, offering 8 power circuits each delivering 30A per channel, 100A total to power your accessories. This kit upgrades the stock switches by increasing the amp rating to a consistent 30A across the OEM channels, while providing five extra channels for upgradability. Added control from the built-in Bluetooth technology allows enthusiasts to control all channels wirelessly from any iOS or Android device, unlocking a wide range of programming options such as output dimming, strobing, flashing, auto power-up, momentary settings, switch linking and more, sPOD allows simple and safe power management that is worry-free, allowing enthusiasts to take control.Key Features:Use OEM upfitter switches to trigger the BantamXIncrease amp rating across the OEM switches to 30AGain five extra switches with the BantamXBluetooth functionality through the sPOD app; output dimming, strobing, flashing, auto power-up, momentary settings, switch linking and moreYou don’t need to run a controller cable through the vehicle firewall5-year manufacturer warrantyKit Includes:(1x) BantamX System(1x) 84” Battery Cable Set(1x) Ethernet Cable(1x) Upfitter Harness(1x) Mounting Bracket SHOP NOW

Whether you're an off-road enthusiast or a professional looking to streamline your vehicle’s electrical system, sPOD delivers seamless integration with factory fitments and an unmatched factory-finished look. Designed to simplify power management, sPOD offers solutions that eliminate the need for cumbersome relays, wiring looms, and circuit fuses, making it one of the simplest and most reliable solid-state power control systems on the market.Built for Your NeedsThe BantamX and SourceLT units feature cutting-edge solid-state technology through sGuard, delivering up to 30 amps per circuit and 100 amps of total continuous power. This provides reliable power management for your accessories without the hassle of traditional relays and fuses. Plus, with the added protection of Low Voltage Cutoff (LVCO), your battery is safeguarded from damage by automatically shutting down electrical components when voltage drops too low.sPOD offers two powerful and space-saving systems: the eight-circuit BantamX and the six-circuit SourceLT. Each system features robust solid-state technology to provide continuous power, flexibility, and reliability, allowing you to easily power a broad range of 12-volt accessories. Bluetooth connectivity through the sPOD app on Android and iOS lets you wirelessly control your system from your smartphone, giving you freedom and convenience.Tailored Solutions for Every Adventure VehiclesPOD offers vehicle-specific kits for Jeep, Ford, Toyota, Can-Am, Polaris UTVs, and Mercedes Sprinter vans. These kits are designed to integrate seamlessly into your vehicle’s cabin for a factory-installed look and functionality, offering multiple configurations to meet your needs. sPOD also offers universal power management solutions for non-vehicle specific kits, giving the option to add sPOD to any vehicle on the road today. Ford F-250/350 Super Duty (2023-on)BantamX Upfitter Kit - The sPOD BantamX Upfitter power management system for the 2023-on Ford F-250/350 Super Duty is specifically engineered to integrate with the factory upfitter switches of these vehicles. With 8 power circuits, each delivering 30A and a total capacity of 100A, this plug-and-play system is designed to fit seamlessly into the customer’s truck. This kit offers the customer the use of OEM upfitter switches to trigger the BantamX while increasing amp ratings across the first four switches to 30A. Customers will gain two to four extra switches, depending on configuration. The addition of Bluetooth functionality through the sPOD app: output dimming, strobing, flashing, switch memory, auto power-up, momentary settings, switch linking, and more. This Upfitter kit will also omit the need to run a controller cable through the vehicle firewall.BantamX/Touchscreen or HD Smart Panel Kit – Designed to mount into the sunglass holder of the upper console, this kit includes the BantamX with 8 circuits of power each at 30A per channel, 100A total for power distribution. Customers can choose from the digital Touchscreen controller, or the HD smart panel controller with tactile feedback buttons.SourceLT/Mini6 Kit - The SourceLT offers 6 circuits of power each at 30A per channel, 100A total for power distribution along with the Mini6 controller with tactile feedback buttons. Ford F-150/Raptor (2021-on)BantamX/Touchscreen or HD Smart Panel Kit – Designed to mount the controller into the sunglass holder of the upper console, this kit includes the BantamX with 8 circuits of power each at 30A per channel, 100A total for power distribution. Customers can choose from the digital Touchscreen controller, or the HD smart panel controller with tactile feedback buttons.SourceLT/Mini6 Kit - The SourceLT offers 6 circuits of power each at 30A per channel, 100A total for power distribution along with the Mini6 controller with tactile feedback buttons. This kit is also designed to mount the Mini6 into the sunglass holder of the upper console. Toyota Tundra (2022-on)BantamX/Touchscreen or HD Smart Panel Kit – This kit for the 2022-on Toyota Tundra includes the BantamX with 8 circuits of power each at 30A per channel, 100A total for power distribution. Customers can choose from the digital Touchscreen controller, or the HD smart panel controller with tactile feedback buttons.SourceLT/Mini6 Kit - The SourceLT/Mini6 kit for the 2022-on Toyota Tundra offers 6 circuits of power each at 30A per channel, 100A total for power distribution along with the Mini6 controller with tactile feedback buttons. Can-Am Maverick RSteering Wheel Kits - sPOD offers two steering wheel kits for the Can-Am Maverick R; the BantamX/HD Steering wheel kit or the SourceLT/Mini6 Steering wheel kit. Both kits have been engineered to seamlessly integrate into the steering wheel of the Can-Am Maverick R, giving power to control up to 8 accessories, each with 30A per channel, 100A for total power distribution. Mounted directly onto your steering wheel, the sPOD steering wheel kits place accessory controls at your fingertips. A simple thumb swipe allows you to focus on driving without distractions, ensuring ultimate convenience and safety.Center Console Kits - With two console kits for enthusiasts to choose from, BantamX/HD or the SourceLT/Mini6, these console kits allow access of up to 8 channels for accessories, each with 30A per channel, 100A for total power distribution. Designed to integrate into the cabin seamlessly while providing a safe place to access all of your controls. Polaris RZR Pro RSteering Wheel Kits - The sPOD SourceLT/Mini6 steering wheel kit has been engineered to seamlessly integrate into the steering wheel of the Polaris RZR Pro R, giving power to control up to 6 accessories, each with 30A per channel, 100A for total power distribution. Mounted directly onto your steering wheel, the sPOD steering wheel kits place accessory controls at your fingertips. A simple thumb swipe allows you to focus on driving without distractions, ensuring ultimate convenience and safety.Center Console Kits - With two console kits for enthusiasts to choose from, BantamX/Carling Switch or the SourceLT/Carling Switch, these console kits allow access of up to 8 channels for accessories, each with 30A per channel, 100A for total power distribution. Designed to integrate into the cabin seamlessly while providing a safe place to access all of your controls.Roof Mount Kit - The BantamX/HD Smart Panel roof mount kit has been engineered to mount the control panel on the roof bar of your Pro R while having your BantamX tucked away at the lower foot panel. With 8 channels for accessories, each with 30A per channel, 100A for total power distribution. Mercedes Sprinter Van (2019-on)BantamX/HD Smart Panel Kit – Engineered to integrate the HD smart panel controller in the sunglass holder of the upper console, the mounting plate has been designed at the perfect angle to access switches easily. Includes the BantamX with 8 circuits of power each at 30A per channel, 100A total for power distribution. Customers can choose from the digital Touchscreen controller, or the HD smart panel controller with tactile feedback buttons Jeep JL/JT/JK/TJ/LJBantamX/Touchscreen or HD Smart Panel Kit – Designed with a specific engine bay mounting plate for the BantamX, each system has 8 circuits of power each at 30A per channel, 100A total for power distribution. Customers can choose from the digital touchscreen controller, or the HD smart panel controller with tactile feedback buttons. Specially designed kits for the Jeep 392 V8 are also available. SourceLT/Mini6 Kit - The SourceLT offers 6 circuits of power each at 30A per channel, 100A total for power distribution along with the Mini6 controller with tactile feedback buttons. This kit comes with a specific engine bay mounting plate.BantamX/SourceLT Wireless Switch Controller Kit - Designed to be paired with the sPOD app on your Android or iOS device, the sPOD wireless controller kit allows the freedom to control accessories how you want. With Bluetooth capability allowing users to control their accessories without being tethered to the vehicle.Engineered to Take ControlsPOD is a leading innovator in vehicle power management solutions, dedicated to enhancing the driving experience for enthusiasts, adventurers, and professionals alike. With a commitment to quality, performance, and innovation, sPOD has earned a reputation as a trusted partner for automotive power control management systems backed by an industry-leading 5-year warranty. Let sPOD give you the power of control. 

One of the most standout builds we've encountered is Roy's 1962 Jeep FC-170. This unique rig was purpose-built not only for camping and exploring but also as a chase truck for assisting a race team in Baja.Let’s dive into what sets this truck apart and why it earned a spot as sPOD’s booth vehicle at the 2023 King of the Hammers. Roy has spent most of his life around Jeeps and was looking for the ultimate Jeep build. In 2002, after searching for the right project, he picked up this Jeep FC-170 from Pinion Pines, CA in 2002 after seeing it for sale on Green Sheet. For Roy, this was the start of one of his most favorite builds he has done. "I built this truck, not just for going camping and exploring, but also to act as a chase truck when helping the #94 Christopher Polvoorde trophy truck race team down in Baja", explains Roy. "The Jeep spends a lot of time in the local deserts and mountains and has seen a lot of rough trails that haven’t been driven for a while. It is purpose built and modular in a way that adapts to whatever event or needs may be expected." Roy has set his FC up with a dual sPOD BantamX units daisy chained together, controlled in the cab by the sPOD touchscreen controller. This set-up allows Roy 16 channels to power all of his lights and other powered accessories that have been added for when he is off the grid."I use the sPOD system because it is simple to install and there is not much room under the dash in an FC to begin with. It powers all of the exterior Baja Designs lights along with the A/C and Trans cooling fans, and Bed/Canopy power accessories", explains Roy.  The FC did not start out to be a show truck. Throughout it's build, the attention it garnered allowed Roy to use his FC-170 as a show vehicle. But don't let the looks fool you, this rig is meant to go out and hit some of the roughest trails out there. By no means is this Jeep a trailer queen. As Roy says, "With all of my rigs, I do use them, not abuse them." 20 years of traveling all over California with the Jeep FC-170. From the mountains to the deserts, Roy has taken his Jeep FC almost everywhere on the trails, stunning other 4x4 drivers by the fact that he has taken it where it it shouldn't have gone.  While it's plenty capable, he explains "is that it will want to go up most anything but is abit more nerve racking going down something steep, the back end hasre-positioned itself more times that I care to think about."We here at sPOD love Jeeps, even more so when they are as unique as this 1962 FC-170. The scarcity and unique-ness of this utilitarian truck earns it a spot on our vehicle spotlight wall. Visit @1stgearoffroad on Instagram to learn more and follow where Roy takes his rig next! Products Used on the FC-170 sPOD BantamX Touchscreen - Universal Universal Starting At:$915.00 The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one... sPOD BantamX Add-on - Universal Universal Starting At:$575.00 This is an add-on BantamX for existing sPOD systems/controllers only! Controller not included. !!! NOTE !!! At least one sPOD controller must...

sPOD is proud to announce the release of the BantamX Upfitter power management system for the 2023-on Ford F-250/350 Super Duty trucks. This system has been engineered specifically to wire into the factory upfitter switches of the Super Duty. The BantamX has 8 circuits of power each at 30A per channel, 100A total, the connect-and-go system has been designed to fit seamlessly into your vehicle to fit your needs. No longer are you limited to the power output of the stock upfitter switches, the BantamX offers more versatility to power a multitude of powered accessories such as lights, actuators, lockers, fans and much more. Use your OEM upfitter switches to trigger your BantamXIncrease amp rating across the first four switches to 30 AmpsGain two to four extra switches with the BantamX, depending on configurationBluetooth functionality through the sPOD app: output dimming, strobing, flashing, memory, auto power-up, momentary settings, switch linking and moreNo longer need to run a controller cable through vehicle firewallsPODConnect™Designed and equipped with built-in sPODConnect™ Bluetooth technology allows users to program from any iOS or Android device via the sPOD app. With a wide range of programming options available, including output dimming, strobing, flashing, master-slave functions, memory, auto power-up, momentary settings, switch linking, input control and more. sGuard™ and LVCO™No relays, no fuss, the sGuard programmable self-healing technology guards the entire system along with LVCO that automatically disconnects accessories to monitor and protect the battery from over-discharge. uLink™The BantamX allows system scalability through the expansion ports of up to 32 channels controlled by one controller with additional BantamX add-on systems. This same feature also allows two controllers to be connected to one BantamX system.Backed by a 5-year* manufacturer warranty, sPOD allows simple and safe power management that is worry-free, allowing you to take control.The BantamX Upfitter System includes: (1x) BantamX System (1x) 84” Battery Cable Set w/100Amp In-Line Fuse(1x) Upfitter Harness(1x) Ethernet Cable(1x) Mounting Bracket(1x) HD Legend SheetAll necessary hardwareSpecs for the BantamX: 8 circuits rated at 30 amps at 12.5 VDC per circuit, 100A total16-position terminal block Integrated low voltage cutoff battery protection w/ optional override 100 amp in-line fuse Operates on 12 VDC or 24 VDCBuilt in Bluetooth capabilities for remote app controlInput control automates functions for all switch circuitsSystem Scalability allows expansion of up to 32 channels, controlled by one controller2 controller port compatiblePower saving deep sleep mode See more sPOD Power Management Solutions for the Ford Super Duty:  SHOP NOW

Jason Denney, aka @tacodust has built his fair share of offroad vehicles - from rock crawlers, a long traveled Tacoma outfitted to an Overlander’s dream (before the word “Prelander” existed), big body rigs like his Prospector XL, and many more - and he took all he learned from his previous builds to do one thing: Build the most all-around capable rig he could, and this Raptor was born While showcasing the ups and downs of the build with his audience on social media, Jason turned a low mileage stock one owner truck into possibly our favorite 2nd Gen Raptor on the planet. Jason needed a robust yet simple system to power a plethora of Baja Designs lights, and other accessories. With two sPOD BantamX systems linked together, for a combined 16 switches, he has power for everything. While he can control all 16 switches from his cab with our Touchscreen system, each sPOD has a specific purpose. One system’s main function, like many offroad trucks, is for powering Baja Designs driving lights, including about 60,000 lumens of forward projecting lights, chase lights, and 2 rock lights per wheel well. While the second system is the backbone of what makes this truck a step above your average Raptor prerunner build. With an HD control panel mounted to the BuiltRight Industries molly panels, Jason is controlling everything that makes this truck perfect for his other hobbies outside hitting whoops. Jason still has 2 empty switches for future accessories, but we’ll go through each switch filled switch to show you the unique way he uses his second system Switch 1 - 4 Baja Designs rock lights used as cargo lights mounted in his Smart Cap Switch 2 - 2 Baja Designs S1s mounted to the rear door of the Smart Cap for area lighting Switch 3 - in-bed power to charge e-bikes Switch 4 - Dometic fridge Switch 5 - Dual air compressor to air up his 38” Nittos and the tires on his array of Specialized bikes Switch 6 -  to a removal 12v backbone harness to power chargers and lights in his roof top tent when the truck is in full camper mode Switch 7 - Open Switch 8 - Open There's no doubt that Jason has built his truck to be self sufficient while out on the trails for multiple days. With the help of sPOD to power and manage all of his accessories at his fingertips to make his life easier so he can enjoy the trails on his days out without worrying about his electrical.

Tyler Cates, known as @tylercatesphotos on Instagram has built himself a purpose ready truck that allows him to take the trails deep into the desert where he shoots photos of the most off-road ready vehicles in Southern California. His 2020 Ford Ranger XLT may have started out as a stock vehicle, but over time has built it up to be very capable of hitting the whoops of Johnson Valley or the trails of Big Bear.  Let’s get into what makes his Ranger one of the more unique builds on the trails today, and how he has incorporated sPOD to power his accessories. Starting with the engine bay, Tyler runs a Mountune Intercooler with Charge Pipes, Turbosmart BOV, Mishimoto Intake, and AWE Performance Exhaust. Moving to the interior of the truck some unique products used in there are custom seats, carbon fiber oem style steering wheel, carbon fiber interior dash pieces, an sPOD HD 8 Switch, Rugged Radios M1, and an Ultimate 9 throttle controller! For lighting, Tyler has outfitted his Ranger with a fill assortment of the latest Rigid Industries lights. On the A-Pillar are the Adapt XP extremes, while on the front bumper is a series of the Rigid 360 6-inch round lights along with the D-series hung under the bumper for total coverage in any situation. Tyler uses 37 x 12.5 x 17 General Grabber ATX tires on 17-inch KMC wheels Grenade Desert beadlocks. This bulletproof combination allows him to tackle any terrain when chasing race vehicles out in the desert. He installed larger fender flairs from ADV Fiberglass to conceal the large General Grabbers from kicking up any rocks or debris, RKSport V1 Ranger Hood, and the Prerunner Style Bumper giving the truck that aggressive look he was looking for.  For suspension, he is running a custom +3 Ranger Mid Travel kit with custom tig welded sleeved tie-rods, King Shocks 2.5" x 8" king coilovers with 2.5" x 8" triple bypass up front and Icon 2.0 smooth body shock and a custom leaf pack from Alcon out back. To power all of his lights and accessories, Tyler Is utilizing the sPOD BantamX/HD Smart Controller 8-channel system for ease of usability. Keeping access to his accessories at his fingertips at all times is essential while on night time photo shoots. Keeping his dash clean, he decided on mounting his HD controller on the door of the sunglass holder on the upper console, giving that sleek and hidden look. “This product has made wiring such a breeze and cuts out a lot of the extra unnecessary wiring or drilling holes for several switches on my dash. I wanted to keep my dash as clean as I could so the sPOD was the perfect product to help achieve that goal.” “Its the perfect truck to jump in and drive down the road to work or even plan a weekend getaway to the desert and know it won't have any issues tackling the terrain.” , Tyler explains of his build. “ Its been a pleasure building this truck with so many great brands such as sPOD and I couldn’t have asked for better partners” sPOD System used in Tyler Cates' Ford Ranger XLT:   BantamX HD - Universal Universal Starting At:$915.00 The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one... Bantam X Specs: • Fully programmable, digital controlled system• 8 circuits rated at 30 amps at 12.5 VDC per circuit• 16-position terminal block (easily attach accessories)• 2 controller ports (RJ45) for Ethernet cables• Integrated low voltage cutoff (LVCO) battery protection w/ optional override• One ATM mini-style fuse for LVCO protection & reset• Failsafe self-healing fault protection system (from 1.5 to 30amps)• Current-sensing MOSFETs controlled by a microprocessor (no fuses & relays)• 100amp in-line fuse• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket• Operates on 12VDC or 24VDC• 8-position input terminal block for controlling outputs• Built-in Bluetooth capabilities for remote control• Protection against: overheating, over-current, shorts, reverse polarity & field collapse• Ignition control and safety lock-out for switches 1 and 2 (optional)• On-demand wireless software updates/upgrades                      

If you're looking to take control of all your 12V accessories on your vehicle, then an sPOD BantamX is a no-brainer. The sPOD BantamX solid-state technology system provides a continuous power flow of up to 100 amps and features up to eight circuits, rated at 30 amps each. That means this system can handle incredible power to control most accessories, whether you are building a full-tilt Prerunner or overland adventure rig destined for the Rocky Mountains. sPOD gives you the power to take control and adventure further with confidence. With all the advanced technology designed into the power management systems, we wanted to tell you five things you didn't know about the sPOD BantamX. Input Control Taking factory integration to the next level, the sPOD BantamX comes standard with factory inputs, which allow you to integrate your power control module system with your vehicle's OEM equipment. It allows you to integrate things like your rock lights being programmed to come on with the door triggers or will enable you to control your sPOD with factory up-fitter switches by running wires from the input terminal to the corresponding circuits. Another great use for input controls is integrating your power control module system with your vehicle's OEM equipment. It will enable you to incorporate things like your fuel pump circuit to turn on when the ignition turns on, making it extremely convenient for a startup sequence. These are just some of the endless use cases for utilizing Input Control. Dip Switches On the sPOD BantamX power control module, there are six small dip switches that have multiple functions to control different features of the system. We know you are probably looking at these switches and are thinking, "What the heck is this?". Don't worry; we got you covered; let's dive into it. Switch 1: This engages your sPOD into Bluetooth pairing mode. All you do is flip it on, and Bluetooth is ready to pair. Switch 2: All sPOD Systems are compatible with both 12V and 24V systems that you would typically see in industrial applications. The (OFF) position signifies it is on 12V and (ON) is 24V. Switches 3 & 4: Lock-out control functions for corresponding switches #1 & #2, when working in tandem with the input triggers, enable the ability to have a lock-out function such as lockers, high beams, and even reverse light. Switches 5 & 6:  This is utilized if you want to connect multiple bantams together to utilize under one controller. There is a possibility of linking up to four Bantam units together for a total of 36 circuits. Bluetooth Each sPOD comes with built-in Bluetooth technology, enabling wireless control via the sPOD App and offering various programming options, including output dimming, strobing, flashing, and more. Switch Linking Switch linking is a great function that is standard on the sPOD BantamX. The switch-linking function can easily be controlled through the app and saved to the switch panel by selecting which circuits you want to turn on with the master circuit, and then when you select that master circuit, the corresponding circuits turn on. A great use case for this is linking an ignition circuit to a fuel pump. That way, when you turn on your ignition, your fuel pump automatically turns on. In addition, you can even have a circuit where you can link all your lights together and have them turn on all at once. HD Panel Smart Functions The HD panel is more than just a typical switch panel where you may typically turn circuits on and off. It is much more than that; it is a smart panel that includes various programmable modes for the BantamX, such as dimming, flash momentary, strobe, switch linking, and a master switch setting.   Now You Know In summary, there is a lot to learn about the sPOD BantamX, and sometimes, it can be used in very advanced applications. The sPOD BantamX offers control over 12V and 24V accessories in vehicles, boasting solid-state technology, up to 100 amps of continuous power flow, and advanced features like input and dip switches, Bluetooth connectivity, switch linking, and HD panel smart functions. With its ability to seamlessly integrate with OEM equipment and provide many different control options, the sPOD BantamX is a must-have for enthusiasts looking to take control of their power management capabilities. If you want to learn more about the sPOD BantamX's technical details, you can check out the instruction manual here.

Building a UTV to go desert racing requires much more than just bolting a roll cage and safety seats and showing up to the start line of the Baja 1000. It requires attention to detail that includes many safety components and redundancies built in to survive the abuse that comes from the harsh desert. There are many well-equipped UTVs that race off-road, but very few are built to the attention to detail of Andrew Garvey's Can-Am Maverick X3 built by Alsup Racing Development. Of course, we had a chance to check out the race car while at King of the Hammers and see how sPOD was a crucial component when building this race car. While it is hard to say there is one component of the UTV, power management is certainly necessary. Powering the Can-Am X3 12V accessories are two sPOD BantamX HD units and one Source LT Mini6 to run up to 22 circuits in total. The sPOD BantamX solid-state technology system provides a continuous power flow of up to 100 amps and features up to eight circuits in total, rated at 30 amps each. In this system, the power management controls everything from the Baja Designs lighting to important functions such as fuel pumps, radiator fans, and GPS systems. The BantamX comes equipped with a wide range of programming options available, including output dimming, strobing, flashing, switch linking functions, memory, auto power-up, momentary settings, input, and more that can be controlled through the app as well. When racing in the desert, redundancy is key; the last thing you need is a part to fail and not have spares, which is why multiple circuits are controlled by multiple fuel pumps. Switch linking is a great function that comes standard on both the sPOD BantamX and Mini6. if you look closer, you can see a switch labeled "Party Mode," which makes the siren turn on and have the a-pillar lights flash simultaneously. The switch-linking function can easily be controlled through the app and saved to the switch panel. Another great use of the custom functions of the sPOD BantamX is the input controls. Each BantamX comes standard with factory inputs, which allow you to integrate your power control module system with your vehicle's OEM equipment. It will enable you to incorporate things like your fuel pump circuit to turn on when the ignition turns on, making it extremely convenient for a startup sequence. Alsup Racing development did a phenomenal job building this Can-Am Maverick X3, everything from the design ethos of the low-lying chassis to all the components that make this build so great. This UTV is just one of many ways you can use an sPOD power management system in race cars.        

We are proud to introduce the integration of steering wheel accessory controls for the all-new 2024 Can-Am Maverick R with the sPOD SourceLT Mini 6 Steering Wheel Kit and the sPOD BantamX HD center console kit for those who want to expand up to eight circuits. These power management systems are designed to fit perfectly with the Can-Am Maverick R, offering convenience and advanced control of your 12V accessories up to 8 Cricuits. Can-Am Maverick R, sPOD Mini6 Steering Wheel Kit Designed to complement the factory controls on the Can-Am Maverick R, the sPOD SourceLT Mini6 Steering Wheel Kit provides an elevated driving experience. This design was specifically designed for the enthusiast who wants complete control over their driving experience, and with a switch system that is mounted right on the steering wheel, you can be within a finger's reach of the switch you need, such as lights or horn.  The Source LT Mini6 intuitive interface allows for control of up to six circuits, each with a 30-amp circuit rating and a total power management capacity of 100 amps. Complete with built-in Bluetooth technology, it enables wireless control via the sPOD App, offering various programming options, including output dimming, strobing, flashing, and more.  The impeccable design of the sPOD SourceLT Mini6 Steering Wheel Kit ensures seamless integration while maintaining the Maverick R's factory steering wheel functions. We designed the steering wheel kit to use one cable to connect beneath the steering wheel plate, guaranteeing unrestricted wheel movement. Key Features of the sPOD SourceLT Mini 6 Steering Wheel Kit Control up to six accessories. 100 amps of total power management capacity. Seamless integration with Can-Am Maverick R steering wheel. Bluetooth control, flash, dim, strobe, momentary functions. Coiled cable design for unrestricted wheel movement. Simplified installation with no relays or circuit fuses. Integrated low-voltage cutoff battery protection. 12-position terminal block for enhanced connectivity. Can-Am Maverick R SourceLT Mini6 Steering Wheel  Kit |MSRP: $759.95  Can-Am Maverick R, sPOD BantamX HD & Source LT Mini6 Center Console Kit For those seeking expanded control, the sPOD BantamX HD Center Console Kit allows effortless control of up to eight accessories, each with a 30-amp circuit rating and a total power management capacity of 100 amps. This integration maintains the traditional location of a standard switch system while also being offered in a Source LT Mini6. The BantamX HD simplifies wiring for aftermarket lights, whips, helmet pumpers, and radio controls but gives you even more control with the system's factory inputs and custom switch programming. Mounting and installing the sPOD systems for the Can-Am Maverick R is a breeze, with the single ethernet cable extending discreetly behind your dashboard to connect with the Source LT and BantamX modules, conveniently mounted under the upper hood. This minimalist setup eliminates the need for cumbersome relays, wiring looms, and circuit fuses, making it one of the simplest solid-state power management systems on the market today. Key Features of the sPOD™ BantamX HD Center Console Kit: Control up to 8 accessories. 100 amps of total power management capacity. Input circuits for expanded control with Can-Am Maverick R.  Seamless integration with Can-Am Maverick R. Bluetooth control, flash, dim, strobe, and momentary functions. Simplified installation with no relays or circuit fuses. Integrated low-voltage cutoff battery protection. 16-position terminal block for enhanced connectivity. Can-Am Maverick R HD BantamX Center Console Kit |MSRP: $999.95  Can-Am Maverick R Mini6 SourceLT Center Console Kit |  MSRP: $759.95   The sPOD power management systems are engineered to simplify the wiring of aftermarket accessories on the Can-Am Maverick R and allow for advanced control while providing advanced integration. Whether you're rallying the Can-Am Maverick R down trails in Utah or racing down the Baja coast, the sPOD™ power management systems are the ultimate solution for those seeking unparalleled control, safety, and convenience. We are beyond excited to bring a direct plug-and-play solution for the Can-Am Maverick R. With a commitment to quality, performance, and innovation, sPOD has earned a reputation as a trusted partner for automotive power distribution systems backed by our industry-leading 5-year warranty.

Some builders transcend the boundaries of convention, transforming restoration into an opportunity for unprecedented innovation. Enter Morgan Clarke of MCD1 and his remarkable recreation, Vivian, the 1973 Ford F100 prerunner. What was initially intended as a mere rebuild of Eric Conner's Tundra from a rollover evolved into a testament to bespoke design—a work of automotive art. From the beautiful metal work that transcends fabrication norms of everything you can expect out of a truck, from the Baja Designs nestle behind the front bumper and the 16 switch sPOD BantamX controls all the 12V accessories on this truck. We had an opportunity to link up with Eric to see Vivian in person to cruise around downtown Los Angeles for some sightseeing. Eric Conner's Ford F100 affectionately known as Vivian, started out as an early 2000s Toyota Tundra Prerunner, and after a bad crash in the desert, it was time to rebuild the truck. So he handed it off to Morgan Clarke from MCD1 to handle the task of bringing the truck back to life. While ripping off the cab, the project developed a severe case of scope creep and snowballed into a complete truck rebuild. The only original part left on the truck was the 3ft section of the frame.  Eric has always wanted a 1973 Ford F100 hot rod truck, so he thought, why not use this opportunity to build a new truck? The result is nothing short of spectacular. The suspension is similar to what you would see on a Trophy Truck racing down in Baja; when measuring the amount of wheel travel, they use the unit of feet instead of inches.Even the interior has been completely rebuilt with the design ethos of luxury prerunner, complete with PRP Racing Seats, GPS, and even air conditioning.  Powering the truck is a V8 Chevy LS Moruzzi Race Motor, making over 700HP. With a patina rusty cab combined with high horsepower, this truck is the exact definition of a hot rod. Just look at the custom fabrication from Morgan on the truck, every tube and sheetmetal design was methodically designed to provide a certain aesthetic that has a simple yet elegant ethos of the build.   Up front, Morgan Clarke built a bash bar reminiscent of what you would typically see on race trucks built in the 80s and 90s, often referred to as "cattle pushers." You can probably guess why. Behind it are five Baja Designs LP9s, and in the headlights are Baja Designs LP6s, which look right at home. But if you look even closer at this build, you will see an excess of Baja Designs, from the S1s in the grille to the 10" S8s in the upper section of the grill. It is a subtle but defined look that only sticks out upon a closer look.  Powering all the accessories on this beautiful F100 Prerunner are two sPOD BantamX with a custom raw machined HD Panel good for 16 circuits. Each BantamX gives Eric 30 amps per circuit rated at 100amps at a max rating. Whether he is tying in his fuel pump or ignition or running solely on the Baja Designs off-road lights, there will be access to 200 amps.  The sPOD BantamX units come equipped with built-in Bluetooth technology, giving Eric the freedom to program and control his system from any wireless device, with a wide range of programming options available, including output dimming, strobing, flashing, master-slave functions, memory, auto power-up, momentary settings, input, and more that can be controlled through the app as well.   Vivian is more than just another prerunner; it is a hot rod made for the desert, but it looks right at home in downtown Los Angeles, complimentary of the rusty patina. With Eric's business So Cal Suspension hand painted on the door it reminiscent of an old shop truck that could be seen driving around LA from business to business on any day of the week. Eric has spent nearly every other weekend for the past few months taking it to the desert and abusing it. sPOD even used it for their SEMA display vehicle, which also had Baja Designs DOT LP6 headlights nestled in the grill. The collaborative effort between Morgan Clarke and Eric Conner resulted in the transformation of the 1973 F100 Prerunner, Vivian, into an automotive masterpiece that marries vintage aesthetics with cutting-edge technology, boasting a V8 Chevy LS Moruzzi Race Motor, Baja Designs lighting, and sPOD BantamX control systems. This restoration transcends norms, combining master metalwork, a rustic patina cab, and an insane Trophy Truck suspension setup, exemplifying a remarkable fusion of tradition and innovation in automotive design.

sPOD is proud to announce the direct integration of power management solutions for the Polaris RZR Pro XP, Turbo R, and Pro R models with the all-new sPOD SourceLT Mini 6 Steering Wheel Kit and sPOD BantamX HD Panel Roof Mount kit. These kits were designed to enhance your driving experience while out on the trails; this innovative product by sPOD brings unmatched convenience and control right to your fingertips. Mounted directly to the steering wheel for a seamless fit and finish, the sPOD SourceLT Mini 6 Steering Wheel Kit sets a new standard for integration on the Polaris RZR. Gone are the days of fumbling for switches while navigating challenging terrain. With this sPOD power control system, you can effortlessly control up to 6 accessories, each rated at 30 amps per circuit, for a total power management capacity of 100 amps. Imagine the freedom of commanding your vehicle's accessories with a simple swipe of your thumb, allowing you to stay focused on the road or trail ahead. The sPOD SourceLT Mini 6 Steering Wheel Kit's user-friendly interface makes it easier than ever to access your Polaris Pro R lights, whips, helmet pumpers, radio controls, and more. Equipped with built-in Bluetooth technology, you can program and control the system from any wireless device, with a wide range of programming options available, including output dimming, strobing, flashing, master-slave functions, memory, auto power-up, momentary settings, input, and more. What sets this steering wheel SourceLT Mini6 apart is its impeccable design. Underneath the steering wheel plate, you'll find a coiled cable that ensures zero binding when turning the wheel from lock to lock. This thoughtful engineering guarantees that your sPOD system seamlessly integrates into your vehicle's steering mechanism, preserving the smooth and responsive handling you expect. A single ethernet cable extends discreetly behind your dashboard to connect with the Source LT module, conveniently mounted in the upper footwell area. This minimalist setup eliminates the need for cumbersome relays, wiring looms, and circuit fuses, making it one of the simplest solid-state power management systems on the market today. Key Features of the sPOD SourceLT Mini 6 Steering Wheel Kit: Control up to 6 accessories with ease. 100 amps of total power management capacity. Seamless integration with Polaris RZR steering wheel. Bluetooth control, flash, dim, strobe, momentary Coiled cable design for unrestricted wheel movement. Simplified installation with no relays or circuit fuses. Integrated low-voltage cutoff battery protection. 12-position terminal block for enhanced connectivity. Direct integration for the Polaris RZR Pro XP, Turbo R, and Pro R models The sPOD SourceLT Mini 6 Steering Wheel Kit is poised to transform your driving experience, whether you're conquering off-road trails or racing in Baja. It's the ultimate solution for those seeking unparalleled control, safety, and convenience. For those looking for 8 circuit applications sPOD is pleased to announce the availability of the BantamX HD Panel Polaris RZR roof kit and Switch dash integration kits. The sPOD BatamX has been designed specifically to integrate the sPOD HD panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to mount the control panel on the roof bar of your Pro R while having your BantamX tucked away at the lower foot panel. sPOD HD BantamX Roof Mount Kit- Polaris RZR Pro R 2022-2023  Mounted overhead on the Polaris Pro R and Turbo R roll bar, the sPOD BantamX power control management system allows for effortless control of up to 8 accessories, each rated at 30 amps per circuit, for a total power management capacity of 100 amps. The sPOD SourceLT Mini6 Switch Panel Kit is designed to seamlessly integrate into the factory dash of the Polaris RZR Pro R, Turbo R, and Pro XP, giving you the power to control up to 6 accessories, each with a 30-amp rating for a total of 100 amps. It utilizes the classic look and feel of rocker switches but with the power and control of the sPOD SourceLT. We are beyond excited to bring a direct plug-and-play solution for Polaris RZR models such as the Turbo R, Pro R, and the Pro XP. With a commitment to quality, performance, and innovation, sPOD has earned a reputation as a trusted partner for automotive power distribution systems backed by our industry-leading 5-year warranty.