Home > Jeep > Jeep JK 2007-2017 > JK 6 Switch sPOD w\2-1/16" Dia. Gauge hole >

2007 -2008 JK 6 Switch sPOD w\2-1/16" Dia. Empty Gauge hole, Gauge Not included



 
Alternative Views:


Our Price: $435.00


Product Code: 620-07

ADD Legends-Labels

Please add [Add $7.50]
ADD Adapter Harness for ARB compressor

Please add [Add $18.00]
Switch Color 1

  
Switch Color 2

  
Switch Color 3

  
Switch Color 4

  
Switch Color 5

  
Switch Color 6

  

Qty:  
Description
 

This panel has an EMPTY 2-1/16" diameter hole for most 2" inch diameter gauges.
Be sure that you choose a gauge that does not have a large backspace requirement.
Gauge Not included in system.
This bezel Does Not accommodate new Genesis Adapter.

If using a Aeroforce Gauge, request their longer harness.

Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six single light Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.


NOT RECOMMENDED FOR CUSTOM ROCKERS. Switches do not have lower pilot light.


All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 11.2VDC and cuts-back in at 12.8VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Jeep > Jeep JK 2007-2017 > JK 6 Switch sPOD w\2-1/16" Dia. Gauge hole
-->